Filter By:

Reloading dies

Lee Pacesetter Dies
$36.99
Lee PaceSetter Dies include the exclusive Lee Factory Crimp Die to produce factory-like ammunition with improved utility and accuracy. The die set also includes a conventional bullet seater and roll crimper. You can choose the type of crimp you desire. They also include a shell holder, powder dipper, load data and are packed in the nicest storage box ever designed. These are the most copied dies in the world. Every die comes with a written lifetime warranty, 2 year guarantee and guarantee of accuracy or your money back! This set is recommended for assembling ammunition for hunting purposes as the finished rounds chamber easily and can withstand rough handling of the firearm action. Includes full length sizer, bullet seater & roll crimper, factory crimp die, built in stuck case remover, long guided expander, shell holder, powder dipper and load data and instructions.
Hornady Three Die Pistol Set
$64.99
The Cowboy Die sets have been designed for cast bullet reloaders. Each set includes a Full-length sizing die, and adjustable case mouth expander die and seater die that is designed for working with lead bullets. This special seater helps to ensure that ammunition is loaded without deforming lead bullets.
Lee Carbide 3-Die Sets
$37.99
We use a solid carbide insert, ground to a special contour that does not leave the objectional belt mark on the case, common to ordinary carbide dies. With a carbide sizer, no case lube is needed, and you don't even have to clean your cases.
Hornady 50 Cal. Die Set
$349.99
Created from select steel and heat-treated for durability and a lifetime of reloading, the Hornady Custom Grade? New Dimension? 50 Cal. Die Set is so well-crafted, it's guaranteed never to break or wear out from normal use.
RCBS Neck Sizer Die (Group A)
$42.99
RCBS Neck Sizer Dies size only the neck of case (not the shoulder or body) just enough to snugly hold the bullet which leads to increase case life and accuracy.
RCBS Small Base Die Set
$54.99
RCBS Small Base 2-Die sets are useful for reloaders loading for semi-automatic, pump action and lever action rifles to help ensure that proper functioning. Small base sizing dies size brass to minimum specifications and help to ensure that cartridges will chamber every time. Due to the fact that this product sizes more than regular dies, it is crucial to have a sufficient amount of high quality lubricant to prevent stuck cases.
RCBS 3-Die Sets
$54.99 - $74.99
RCBS pioneered and developed the 3-Die Set for straight wall rifle and pistol cases. In the 3-Die Set, sizing and expanding (belling) are done in separate dies. The 3-Die Set has a Sizer Die with Decapping Unit, Expander Die for expanding and belling the case mouth and a Seater Die with Bullet Seater Plug(s) for seating and crimping the bullet.
RCBS AR Series Dies
$45.99 - $59.99
The AR Series is a must for the progressive reloader. It features a Small Base sizing die and a new Taper Crimp seating die. This combination makes reloading easier for AR-style or semi-auto shooters. The Small Base sizer guarantees that the cartridge will rechamber. The Taper Crimp Seater is more forgiving when various case lengths are loaded at the same time. Case neck crimp bulges and buckled shoulders are virtually eliminated when Taper crimping is used with cannelured bullets.
RCBS Cowboy 3-Die Roll Crimp Set
$79.99 - $89.99
Brass lock rings and packaging reflecting the period, complete the picture. New Cowboys Moulds produce bullets that are profiled to give smooth feeding and follow the design. Beveled crimping grooves set the proper cartridge length and improve consistency, and lube grooves hold enough lubricant even for black powder loads.
RCBS Neck Sizer Die (Group D)
$79.99
The Neck Sizer Die features an Expander-Decapping Unit. It resizes the case neck only (it doesn't touch the shoulder or body) and de-primes.
Hornady Full-Length Die Sets
$25.99 - $94.99
Full-length die set includes full-length size die, seating die and expander assembly.
Lee Pacesetter Limited Die Set
$36.99
Lee's limited production pacesetter dies carry the same features and quality of standard dies, but do not include a Lee factory crimp die. You'll find no better die at any other price. Half the price of competitive dies and theirs doesn't include load data which is priceless on odd or absolete calibers.
RCBS Full Length Die Sets (Group A)
$44.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full Length Die Sets (Group A)
$46.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
Hornady Three Die Taper Crimp
$54.99
Hornady Custom Grade Nitride 3-die set that includes a seater die with taper crimp.
Hornady Neck Sizing Dies
$29.99
Neck sizing with this die can eliminate problems of excessive head space, and align the bullet perfectly with the bore, resulting in better accuracy and longer case life. Should only be used for bolt-action rifle cases. Auto-loading, lever and pump action rifles usually require full-length resizing.
Hornady Precision Reloader Accessory Kit
$499.99
The Hornady Precision Reloader Accessory Kit will allow you the opportunity to produce the most accurate reloads possible. Includes: Concentricity Tool. Cam Lock Trimmer. Cam Lock Power Adapter. Lock-N-Load OAL Gauge Curved. Lock-N-Load Comparator Set. Lock-N-Load Headspace Kit. Lock-N-Load Case Prep Trio. Steel Dial Caliper.
Hornady American Die Set
$32.99 - $44.99
Each die set includes a FREE shell holder. Sizing dies size to SAAMI specifications. Internal spindles, expanders and seating stems are interchangeable with other components on the market. Basic reloading data and two extra decapping pins are also included. All Hornady reloading tools and accessories are warranted against material defects and workmanship for the life of the product.
Hornady Lock-N-Load Case Prep Center
$569.99
Micro adjustable to 1/1000 inch. Trim cases from 3/4 inch to 3 1/4 inches in length. Vertical design of the power trimmer and horizontal design of the tools keeps shavings from falling into cases and makes case discharge easy. Power camfer/deburr tool. Large and small primer pocket cleaners included. Comes with five popular neck brush sizes.
RCBS Full Length Die Sets (Group A)
$44.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full-Length Die Set (Group D)
$89.99
2-Die Sets are for bottleneck type rifle and pistol cases, and consist of a Full-Length Sizer Die with Expander-Decapping Unit, and a Seater Die with Bullet Seater Plug.
No Image
$89.99
The Full Length Sizer Die has an expander-decapping unit to remove the spent primer while expanding the case mouth. Vent holes prevent case damage caused by trapped air or excessive lubricant. The Seater Die includes a bullet seater plug and built-in roll or taper crimp as appropriate for the particular cartridge. Shellholders sold separately.
RCBS 2-Die Set
$184.99
The Gold Medal Match Series comprises the finest reloading dies built by RCBS®. The two-die Neck Bushing set includes the Neck Bushing Sizer Die, which resizes only the case neck, and a Seater Die. This changeable diameter neck bushing die has been trusted by benchrest and long-range precision shooters for years. It lets reloaders precisely set the amount of tension on the bullet, reducing work-hardening of the case neck brass, prolonging case life and increasing accuracy. However, getting these benefits requires the use of high-end brass with consistent neck thicknesses. Neck bushings (sold separately) are available in .001-inch increments from .189-inch to .365-inch. Note: Neck Bushings are not included.
RCBS Neck Sizer Die
$69.99
The Gold Medal Match Series comprises the finest reloading dies built by RCBS®. The Neck Bushing Sizer Die resizes only the case neck, and its changeable diameter neck bushing design has been trusted by benchrest and long-range precision shooters for years. It lets reloaders precisely set the amount of tension on the bullet, reducing work-hardening of the case neck brass, prolonging case life and increasing accuracy. However, getting these benefits requires the use of high-end brass with consistent neck thicknesses. Neck bushings (sold separately) are available in .001-inch increments from .189-inch to .365-inch. Note: Neck Bushings are not included.
RCBS Full Length Sizer Die
$69.99
The Gold Medal Match Series comprises the finest reloading dies built by RCBS®. The Full-Length Sizer Die features a self-centering changeable neck bushing that lets reloaders precisely set the amount of case neck tension on the bullet. This reduces work hardening of the case neck brass, prolonging case life and increasing accuracy. However, getting these benefits requires the use of high-end brass with consistent neck thicknesses. By removing the neck bushing, the Full Length sizing die can also be used as a bump die to set headspace back the desired amount. Neck bushings (sold separately) are REQUIRED and are available in .001-inch increments from .189-inch to .365-inch. Note: Neck Bushings are not included.
RCBS Seater Die
$129.99
The Gold Medal Match Series comprises the finest reloading dies built by RCBS®. The Gold Medal Seater Die features a micrometer adjustable, free-floating and self-centering bullet seating system with a convenient bullet-loading window. This allows the bullet to be seated in precise alignment with the cartridge case. The Gold Medal Seater Die can also be used on progressive presses with the exception of the .221 Rem. Fireball, .17 Rem. Fireball and .22 Hornet cartridges.
RCBS Full Length Die Sets (Group A)
$46.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full Length Die Sets (Group A)
$46.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
RCBS Full Length Die Sets (Group A)
$44.99 - $89.99
These 2 die-sets are one-piece reamer construction and hardened steel. Non-slip separate collect holds expander decapping pin in place, perfectly centered. Wrench flats and body knurling for easy adjustments. Steel hex lock rings with set screws.
Page 1 of 2 Next page