LED light strip 10' Long with 10 White LED pods includes hardware
Rugged, tough and reliable, invincible marine offers top of the line boating products and marine accessories at affordable prices, and is well-known for their hardworking nautical line. For freshwater and saltwater boating, invincible marine designs products for avid fishermen and weekend boaters. Quality, utility and innovation go into every invincible marine product giving you more time on the water.
Plug In Bi Color Bow Light.
$14.99 - $21.99
This Hi-Performance Pak is non-toxic, non-hazardous, and re-usable and outperforms standard gel packs. The Engel Cooler Pak makes for a great cooler companion to keep contents cold and dry. Works great in lunch boxes, beach coolers, soft sided coolers and cold shipping. It also works well to extend the life of traditional bagged ice. Enjoy your recreational sports without the mess of melted ice.
LED light strip 10' Long with 10 Blue LED pods includes hardware.
Bi Color LED Bow Light Stainless Steel w/Adaptor Plate & SS Hardware.
$7.99 - $13.49
Low profile stern light base features a sliding cover to keep contact clean. Fits all standard 2 prong stern lights. High impact nylon construction.
24" USCG Approved
$25.99 - $27.99
$3.59 - $17.99
Includes #85 bulb for portable stern/bow lights, #90 bulb for interior lights or stern lights, #1004 for most all around lights, and #1157 for auto park, tail, and signal lights.
Combination red & green navigation light. Triple chrome plated Zamak housing.
Can be mounted above or below the waterline with thru wall mounting. Also can be used as an interior cabin light. 12 volt LED's draw minimal current. Requires a 3/4" mounting hole.
Designed to stop engine when lanyard is pulled. Works with standard inboard/outboard, outboard engines. Includes switch and lanyard.
Six (6) high-powered 1-Watt LEDs. Efficient LEDs provide 100,000 hour operation. High (900-1000 Lumens) light output equivalent to a 50W halogen. Wide 150 light spread. 12-28 Volt DC. Low draw, less than 1/4 Amp UV- & impact-resistant white housing & polycarbonate lens. Waterproof (non-submersion) sealed housing (5" x 3-3/8" x 2"). Shock resistant LEDs. Stainless mounting bracket with adjustable tilt. Also available with adjustable clamp for pipe (3/4" - 1" IPS).
Battery operated clamp-on lights feature a 2 1/2" red/green lens, salt and corrosion-resistant plastic body. Meets all U.S. Coast Guard regulations for boats under 39.37'' (12m).
Battery operated clamp-on lights. Tested to meet or exceed A-16 standards and meet all lawful requirements for use on inland and international waters when properly placed on your boat. 2 1/2" diameter clear reflective lens. Height is 25". Aluminum pole has adjustable C-clamp for fast, easy mounting or removal from seat or transom.
For Kayak's. Led light Portable Removable pin mount Light. Has a 3 way switch (on/off/Strobe)
Underwater Suface Mount 6 Diode 600 Lumens
LED Replacement Tube Light (White w/Red Lights)
$44.99 - $64.99
Two mile all-round light. For boats up to 39.4 ft. (12m) in length. Features a die-cast Zamak base with locking knob that allows pole to be lowered below the deck or removed for storage. Includes one 12 watt lamp. Below deck clearance required: 24" deep X 1" wide. Installation hole size: 7/8" diameter. Base is pre-drilled with three countersunk holes for #10 screws.
PLUG-IN MODEL - Two mile all-round light for boats up to 39.4 ft. (12m) in length. Convenient all-round light can be removed from base for storage. Swivel cover on base protects the socket when light is stowed away. Base extends just 3" below deck. Includes Zamak base and one 12 watt lamp. Base dimensions: 4" long X 1 5/8" wide. Installation hole size: 1 3/8" diameter. Base is pre-drilled with three countersunk holes for #10 screws.
Replacement bulbs for 8012-15 and 9000-15.
$27.99 - $40.99
Head and pole assemblies are for use as original equipment or as replacement parts for 7100 Series All-Round lights. Poles are anodized aluminum. Each pole requires a 2-wire base. Die-cast Zamak base has Perma-Plate® chrome finish and swivel cover that protects the socket when light is stowed away.
Made with a rugged 316 stainless steel cover for outstanding resistance to impact and corrosion. For use on boats up to 65.6 ft. (20 meters). A single external stainless steel lock screw attaches cover to base. Stainless steel electrical contacts. Cover design and integral gasket seal out water; make installation and maintenance simple. Includes efficient, high-output 10-watt bayonet lamp. Compact size allows installation on confined decks.
Frosted For All-Round Lights
Be seen without blinding yourself with Attwood's All-Round LED Pole Light with Articulating Anti-Glare Head. Designed to focus light at the horizon and above and not in the pilot's eyes. The bottom aperture reduces glare at 7.5 degrees below horizontal while allowing a continuous arc of light above horizontal, making the boat more visible in rolling seas and to taller boats. The Articulating Anti-Glare Head also adjusts from 15 degrees forward to 15 degrees aft. While only drawing 1.8 watts at 12VDC, the All-Around LED Light is still visible from up to two miles away and is rated for 50,000+ hours of use. The 2-pin locking collar pole offers a universal fit and can be used with a variety of Attwood 2-pin straight or angled bases. They even work as replacements in competitive bases, including Perko® brand bases.
Whether at anchor or underway, it's important your navigation lights are both functional and clearly visible to nearby boaters. Intelligently designed for easy installation, maintenance and efficient light output, this 36 inch light Armor all-round Articulating light provides 2 nautical mile range of visibility in a 360 degree radius to enhance safe navigation in any venue. LED technology keeps lights cool to the touch and provides lasting durability. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.
One mile combination sidelight for boats up to 39.4' (12m) in length. Narrow base allows mounting on narrow decks or gunwales. Lamp and socket are completely contained inside the housing. Die-cast Zamak with Perma-Plate® chrome finish. Includes one 7.5 watt lamp. Dimensions: 2 1/2" high X 3" long X 2 5/8" wide (at base). Base is pre-drilled with two countersunk holes for #10 screws.
$45.99 - $59.99
Use this Attwood Portable Navigation Light Kit anywhere you need extra light. This light is very durable and water resistant. This Portable Light Kit can be used horizontally, as well as vertically. It has rubber seals on it for maximum durability and contains a booted switch also made of rubber. The Attwood Navigation Light never needs to be plugged in, thanks to the AAA batteries it uses (not included). It can be mounted to virtually any surface to brighten low-light areas. A lighting solution for dim spaces such as basements and garages, it is also small and compact and can be removed when needed.
2-Pin Light Base with overmolded 306 stainless steel and black cover. For more than 100 years Attwood has been proud to serve the parts and accessory needs of the marine industry. We have partnered with you to design, manufacture, test, and distribute a complete line of products that have been a part of your tradition, and we thank you for this opportunity.
Page 1 of 2 Next page