2319-0155 & 2319-0130 Plugs: Ten gauge with butt connectors. Skin carded. 2319-0132 & 2319-0150 Receptacles: Eight gauge or ten gauge with butt connectors. Skin carded.
Choose from any of the following plug in adapters to connect your motor to your favorite brand of sonar or fishfinder. IP68-rated waterproof connectors are metal tipped to prevent sonar interference.
10-gauge with butt connectors.
Propeller kits all contain a propeller, propeller nut and shear pins. It is recommended you keep a spare propeller on your boat at all times. The Mini-2 Bladed Kit is suitable for the T-18 and T-24 motors. The 2-Bladed Propeller Kit is suitable for 28lb, 30lb and 34lb motors. The 3-Bladed Medium…
These spare hand held remotes are great for adding to your existing units or for replacing missing remore controls. Each unit comes with a set of instructions that make it easy to synchronise to your SWRT motor.
MKA-16-03 AP/PD QRB trolling motor mounting bracket
MKA-16-03 AP/PD QRB BULK PACK trolling motor mounting bracket
Put your Minn Kota® trolling motor and Humminbird® fishfinder on speaking terms with i-Pilot® Link?. It delivers fully automatic boat control and the power to find, store and revisit your most productive fishing spots and tracks. And you can take command of it all from either the remote or the…
Fits Minn Kota cable steer bow-mount motors. Ergonomic soft-grip handle. Durable, abrasion resistant 48" nylon rope.
Compatible with Minn Kota Fortrex 80,101, 101H, 112. Constructed of PA66 Glass Filled Nylon. Kit Includes: Trolling Motor Mount. SRM2 Driving LED Light. Amber lens cover included for use in the fog or rain. 25ft Plug and Play Harness with Waterproof Switch.
Includes foot pedal and instructions. Features side-to-side steering. Momentary and constant on toggle. 8-Feet cable with IP68 rated waterproof connector.
Allows for 6-gauge wire connection when using the MKR-18 Trolling Motor Plug & Receptacle.
The G-Force? Handle comes complete with a hook-n-loop strap to secure to the motor shaft while underway. This product will last and can lift in the most difficult situations.
Each kit contains two prop nuts, lock washers and drive pins. Three kits handle virtually all Minn Kota® trolling motors.
Allows mounting on lower unit of bow-mount motors. Rugged, durable construction. Fits transducers of all major manufactures.
100% fully weedless prop. Swept-back, flared blades "wedge" weeds away, allowing you to pass through heavy vegetation at any speed, without draining valuable battery power.
Universal design for 2- or 3-wire configurations on 12-to 36-voldt systems. Watertight sealing cap and corrosion resistant electrical components. Requires standard 1-1/8" diameter mounting hole.
100% weedless. Unique, patented design pushes weeds away to conserve battery power. Easily moves through heavy vegetation, even at slow speeds.
A trolling motor control system which utilizes GPS technology to automatically navigate and position the boat for anglers. i-Pilot integrates GPS technology into Minn Kota Terrova?, PowerDrive V2, Riptide® ST, or Riptide SP bow-mount trolling motors. The Record a Track feature allows an entire…
Delivers extra power to push through heavy vegetation. Fits 3-1/4" (MKP-2) and 3-5/8" (MKP-25) diameters.
Protects trolling motor from electrical damage. 60 amp rating with manual reset. Fully waterproof. Compatible with all 12-, 24- and 36-volt systems.
Allows for easy removal of any PowerDrive or PowerDrive with AutoPilot bow mount motor. High-yield composite construction is super strong and impervious to corrosion. Low-profile design leaves deck clear when motor is removed. Locking handle with stainless steel can be secured with padlock (not…
Convenient, quick removal of any PowerDrive or AutoPilot? trolling motor. Features Locking Quick Release design for a smooth and easy disconnect. Original patented AutoPilot and PowerDrive design.
15 Amp series charger offer the fastest charge times available. A super charged replacement for an existing unit, they use the same footprint as other popular original equipment charges. No new drilling or holes required. Fully automatic 3 stage charging (bulk, absorption and maintenance. For use…
Ideal for small boat, transom applications (boats that do not have battery compartments). Features easy access external battery terminals that allow trolling motor leads and charger leads to be connected without opening the box. Built-in battery meter displays current "state of Charge". Includes…
Monitor the voltage level and "state of charge" of any 12 volt battery with an LCD display mounted on a compact frame that's easy to store anywhere. Includes LEDs that indicate full, 2/3,1/3 or 0 "state of charge".
CoPilot is a patented wireless remote steering system, designed specifically to work with selected Minn Kota electric steer motors such as Riptide with AutoPilot. It features a small wireless remote, similar to an automobile keyless entry remote, that can take full command of your boat's steering…
Provides easier steering and speed control for all hand-control motors. Lightweight and corrosion-resistant, easy to attach and remove.
i-Pilot® uses GPS technology to lock onto a fishing spot, record and retrace paths, set cruise control, and more. Redesigned with an ergonomic new remote, bigger LCD screen, and double the Spot-Lock and Record A Track memory, i-Pilot lets you spend less time positioning your boat and more time…
For wiring where a plug and socket cannot be used. Heavy-duty 10-gauge connectors.