9001 (convertible) Pontoon boat mount: Adjustable range 17" - 24". Front or rear mount. Adapts to platforms skirts up to 4.5". Weighs 2.25 pounds. 8001: Adjustable range 15"-23". Maximum clamps opening 2.125". Weighs 2 pounds.
Mount is a low profile, push button release swivel mount designed for use with lightweight electronic instruments such as Lowrance and Eagle Liquid crystal graphs, radios, VHF Depth sounders, etc. The removable top unit easily snaps into place and can be rotated a full 360° & automatically locked…
Fits tops of Johnny Ray swivel mounts JR300, JR400, JR500.
Set of 1 male and 1 female NMEA 2000 120 ohm terminators.
A simple-push button release permits instant removal of expensive electronic instruments to prevent theft. Top unit can be rotated, 360° and automatically locks into 45 different positions. Molded from tough DuPont 6/6 nylon. Pre-assembled with stainless steel springs and screws, maintenance free.…
Depth/Speed/Temp. Frequency: 50/200 kHz. RMS Power: 600W.
R-A-M 1½" ball- and socket mounting bracket for LMS-350A and GlobalMap® 2000.
Bracket for Mark-5 and Elite-5 models. Works with: Elite-5, Elite-5m, Elite-5x, Mark-5x, Mark-5x Pro.
This mount will take every bit of the vibration out of your trolling motor while all the time protecting the head, shaft and mount from damage. A must for any angler with a bow mount trolling motor. Part number reflects product packaged in clear clam shell for store shelf display. For additional…
Powder Coated Marine Grade Aluminum. 1" black rubber ball. Wt: 0.25 lbs.
24 position automatic locking top. Patented lever-release top removal feature. Heavy duty design for today's biggest electronics. Molded from DuPont nylon and assembled with stainless steel springs and screws.
Powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with a 1" rubber ball and flat 6.25" x 2" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts,…
Powder Coated Marine Grade Aluminum. 2.25" Black rubber ball.
0182-0723: NMEA 2000 network adapter cable. Adapts a blue connector device to a red connector network. 0182-0611:NMEA network adapter cable. Adapts red connector devices to a blue connector network.
Allows transom transducer to be mounted on trolling motors. Made of marine grade aluminum, black powder coated. Fits transom transducers made by Lowrance, Eagle, Hummingbird, Bottom Line and Zercom. Fits Minnkota and Motorguide trolling motors. Header Carded.
Powder Coated Marine Grade Aluminum. 1.5" Rubber black ball. Wt: 0.33 lbs.
Powder coated marine grade aluminum mount, consists of a double socket arm mount, one 2.5" diameter round base with 2.25" rubber ball and flat 11" x 3" rectangular plate. The plate contains different combinations of pre-drilled holes which will match up to many electronic devices and mounts,…
Ethernet cables can be used in conjunction with the Broadband Sounder or the Navico Expansion Port to share picture-like images between units.
0182-1005: 83/200 kHz transom-mount with built in temp sensor. 0182-0710: 83/200 kHz trolling motor mount or shoot thru hull pod transducer with remote temp sensor.
CA-2: 8' adapter cable lets you operate the unit from any vehicle's cigarette lighter that provides 5-16 volts. May also be used along with the AC-CAF to power unit from homes 110 outlet.
PC-21X: Works with: GlobalMap 2400, GlobalMap 3000, GlobalMap 4000M, LCX-15CT, LCX-15MT, LCX-16CI, LMS-240, LMS-320, SeaCharter 320DF, SeaCharter 480DF.PC-24U: Works with: IntelliMap 320, IntelliMap 480, IntelliMap 500C, IntelliMap 502C iGPS, IntelliMap 642C iGPS. PC-23X: Fits FishEasy and FishMark…
0182-0758: 15' cable DSI transducer. 0182-0406: 12' transducer extension cable.0182-0768: 20' transducer extension cable. 0182-0429: 15' transducer extension cable. Includes power lead.
Interface cable connects a compatible outboard engine to an NMEA 2000 network. Once the connection is made, engine data is available on the network for any display to use. A Lowrance T-connector is included with this interface.
Trolling motor-mount, 20° pod style with built in temp sensor (200 kHz). 0182-1006:Trolling motor-mount or shoot-thru-hull, pod type transducer.
Mounting transducers and paddle wheels now simple and easy. Perfect mounting surface for installing, removing, or adjusting transducers to get the maximum performance from your fish locator. Made from Light Gray starboard marine grade polymer sheets. Won't warp, corrode or be affected by sunlight.…
Ram Universal electronic mount, 6 1/4" X 2". The included plate is a universal mounting bracket with a selection of mounting hole locations. In certain applications additional holes may need to be drilled for proper fit with your electronic device.
For Mark & Elite Series.
The RAM-107 consists of a double socket arm, one 2.5" diameter round base and connecting Humminbird/Apelco marine base. The mount is designed with a 1.5" diameter patented rubber ball and socket system that has adjustment points at the cradle base and bottom base. With a twist of the arm knob, you…
The RAM-B-107 consists of a double socket arm, one 2.5" diameter round base and connecting Humminbird/Apelco marine base. The mount is designed with a 1" diameter patented rubber ball and socket system that has adjustment points at the cradle base and bottom base. With a twist of the arm knob, you…
The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 0.5" to 1" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt.